You can get all information and downloads at the webpage :
http://djdecks.be/vinylcontrol
Currently, djDecks supports Final Scratch, MsPinky, VirtualDJ, Serato Scratch Live CV02 and Traktor Scratch vinyls.
In relative mode (without pitch information) you can also use the Synq records and the Mixvibes records by using the Final Scratch plugin and finding out the correct pitch multiplier.
If you got it working, or if you are still having problems after reading the installation guide, feel free to post it on this forum.
Please be sure to mention which soundcard, vinyl and other gear you are using, as well as signal strength and number of codes detected.
If possible, also include the callibration results picture (djDecks\settings\username\callibrate_1.jpg)
* FAQ
Q:
The sound plays in reverse, or only when I play the record backwards
A: Try swapping the left and right connectors to your soundcard or to your pre-amps.
Alternatively, you can also manually switch the input channel numbers in djDecks (ie when it says "0/1" you can type "1/0")
Q:
When I put the needle at the start of the vinyl, the song starts playing at around 20 seconds in the song
A: The newer type of FinalScratch vinyl has timecode in the lead-in as well. Simply set the 'lead-in' time parameter in the vinyl control options to 20000 for example. You may need to restart djDecks before the change takes effect.
If it takes too long before the song starts, a negative lead-in parameter (-15000 for example) can also be used.
Q:
Where can I buy the timecode records?
Check for some online stores. If you know another one, please post it there.
MsPinky vinyls can be purchased directly from
http://www.mspinky.com
* Working setups
See in the FAQs and Guides section.
Legal:
is a registered trademark of