Here's my latest skin:
A mixer panel, vinyl options panel, and basic
video mixer panel (for djDecks DX) are now included along with mix now options. I have added an effects section along with the sampler. I've also updated a lot of the graphics, which should mean a better result with the DX version than experienced using previous builds.
Enjoy!
Screenshots:

Getting startedDrag and drop as normal anywhere onto either player. Use the waveforms buttons (to the left of the big waveforms display) to show the waveforms in different formats. You can right click the 'match' button to snap to beat as well as match the BPM. Deck startup speed and pitch brake can be adjusted using the green and red circular arrow buttons respectively.
Loops, Cues, and Beat Step panelsThe three buttons located opposite play/cue/sync on each player are for 'Loops', 'Cuepoints' and 'Beat Step' panels. The 'Loop' section is fairly self explanatory. For the 'Cues' section, click on a cue point to set a new point or play a current one. The 'X' will delete the relevant cue point. You can scroll through 2 pages of cue points using the arrows to the right of the bank. For the 'Beat Step' section, clicking on a button will advance or recede the number of beats shown on the button, relative to which arrow that button is underneath.
Note: if you click on any of the 'Loops'/'Cues'/'Beat Step' functions while using 'Absolute' vinyl control, djDecks will switch to relative control automatically
SamplerDrag and drop files onto the desired sample slot to load them in. There are a total of 6 sample slots which can be accessed by using the arrow button. The sample volume knob sets the volume level for every channel, so if you have more than one channel open you will need to adjust the volume accordingly. You can play the sample from the start by clicking on the sample number to the right of the sample and also, pause/play the sample using the play button.
Effects (New!)Click on 'Effects' to the left of the large waveforms to reveal the Effects panel. Buttons and parameter knobs should be fairly intuitive; where available, click on the 'Beats' button to show a list of beats over which the effect will phase. Use the down arrows towards the centre to select a different effect or VST.
Mixer Panel (New!)This contains traditional faders and EQ knobs. There is also a button for fader speed, and if you click the button to the right of the three 'mixnow' buttons will reveal a panel to adjust the cross fader curve. Clicking this button again will return you to the 'mixnow' buttons.
Video Mixer Panel (New!)This can be used with djDecks DX.
Vinyl/Timecode Control Panel (Updated)On/Off buttons for each deck are located towards the centre of the panel. I think most of the other buttons are fairly clear. The circular VU meters are for time code signal quality. Click on the TCV type display (below the on/off button) to switch between 'Absolute'/Relative' modes. Line in can be activated by clicking the RCA plug for each deck. This panel also now contains a record feature and 'Instant Doubles'.
Have a play around with things on the skin and see how you get on. Some buttons have left and right click functions so get clicking!!
Please report any bugs, and, as always, I'd love some feedback.
Enjoy,
tintin


This skin is my property. I'm sharing it here for your personal use and it may not be sold/distributed without my prior permission.
